Total Dissolved Solids (TDS) is a precise measure of the amount of solubles released from coffee grounds and retained in the cup after brewing. For traditional phin brewing, controlling this metric not only determines strength but also directly influences flavor structure, particularly the balance between sweetness, bitterness, and the body of the extract.
The scientific mechanism behind the 1.40% TDS threshold
In manual brewing methods, a TDS of 1.40% represents the upper limit of the optimal range, where flavor compounds are most harmoniously distributed:
- Preserving Body: At a TDS of 1.40%, natural oils, lipids, and microscopic colloids are retained in sufficient proportions to create a thick, smooth mouthfeel during tasting.
- Maximizing Sweetness: This is the threshold where sucrose and glucose dissolve completely and present clearly before being overwhelmed by high-molecular-weight organic compounds that cause bitterness.
- Avoiding Over-extraction: When exceeding this threshold (TDS > 1.45%), coffee easily becomes harshly bitter and astringent due to the deep breakdown of tannins and chlorogenic acid, resulting in the loss of natural sweet aftertaste.
The relationship between TDS and Extraction Yield
According to standard brewing control theory, TDS concentration has a close organic relationship with Extraction Yield (EY).
To achieve a TDS concentration of 1.40% in a strong phin coffee cup, the extraction yield needs to be maintained steadily within the range of 18% to 22%. This is the widely recognized golden extraction efficiency range by the Specialty Coffee Association (SCA). If the extraction yield is below 18%, the coffee will be under-extracted, leading to sharp sourness and lack of body. Conversely, if it exceeds 22%, heavy, bitter, and astringent molecular compounds will fully dissolve into the water, ruining the inherent sweetness.
Methods to control and achieve the optimal TDS threshold
To maintain and stably control the TDS index at 1.40% for phin coffee, brewers should note the following technical factors:
- Grind Size: Coffee grounds should be ground to a medium-fine consistency; too fine will clog the phin and raise TDS excessively, while too coarse will cause fast flow and low TDS.
- Water Temperature: The optimal water temperature when contacting coffee grounds should range from 92°C to 95°C to effectively dissolve desired compounds.
- Brew Ratio: The ratio of water to coffee must be accurately measured, typically ranging around 1:4 to 1:5 for traditional strong phin coffee, to achieve the desired dissolved solids concentration without using additives or thickeners.
