SAVINASAVINA

Machine-translated from Vietnamese. The Vietnamese version is authoritative. Read the Vietnamese original →

Grinding finer cannot salvage a batch of under-roasted coffee.

Analyze the technical reasons and physical limitations of tightening the grind size when processing beans with an underdeveloped roast.

Physical and chemical structure of underdeveloped beans.

When a coffee batch is under-roasted or underdeveloped in the roasting drum (underdeveloped roast), the beans are not merely light in color. The core issue lies in the insufficient thermal energy transferred to the bean core, causing crucial biochemical reactions to stall.

Why does grinding finer backfire?

Faced with a bland and sharply sour cup of coffee, conventional technical thinking leads baristas to reduce the grind size. The idea is to increase the surface area for easier dissolution of compounds. However, this action with underdeveloped beans leads to the following negative consequences:

Uneven flow (Channeling)

Under-roasted beans are very hard and brittle; when passed through a grinder, they produce an extremely high and uneven proportion of fines. Attempting to grind even finer creates an overly compact coffee bed. Water under high pressure will seek the paths of least resistance, forming channels (channeling). At this point, part of the coffee bed is over-extracted, causing bitterness and astringency, while the majority remains under-extracted.

Increased astringency and dry bitterness

When ground too fine, the sudden increase in surface area forces large-molecule polyphenolic compounds (astringents) to diffuse into the water more rapidly. Since the beans lack sufficient dissolved sugars and lipids to coat the taste receptors on the tongue, this astringency manifests clearly as a lingering, unpleasant dry sensation in the aftertaste.

Physical limits of extraction adjustment

It is essential to distinguish between adjusting grind size for a well-developed light roast and for beans with an underdeveloped roast due to insufficient heat.

For a standard well-developed light roast, although the cell structure is tight, it has been fully porous, and flavor precursors are ready. In this case, using a fine grind combined with high water temperature is the correct technique to optimize extraction.

Conversely, with underdeveloped beans, the desired flavor compounds (sweetness, ripe fruit and floral aromas) essentially do not exist within the bean because the chemical reactions never occurred in the roaster. Therefore, no matter how much the surface area is increased by grinding finer, water can only dissolve what is present: raw acids, grassy flavors, and astringent compounds.

Practical mitigation strategies for underdeveloped roast batches

If you end up with a batch of underdeveloped coffee and must use it, instead of trying to tighten the grind size on an espresso machine, try the following damage mitigation measures:

  1. Switch brewing method: Avoid pressure-based methods (Espresso). Switch to full-immersion manual brewing devices such as Clever Dripper or French Press to allow for a gentler, extended contact time.
  2. Lower brewing water temperature: Do not use boiling water. Reducing the water temperature to around 88–90°C helps limit the dissolution rate of raw acids and astringent compounds, preserving a more pleasant body.
  3. Increase brew ratio: Reduce the amount of water used for brewing (e.g., from a 1:16 ratio down to 1:12 or 1:14). This reduces the extraction volume, retaining the most concentrated core to mask defects that emerge in the later stages of extraction.
  4. Blending: Blend this defective batch with a medium or dark roast batch to compensate for the lack of body and sweetness.
Nguồn tham khảo:
  • Underdeveloped Coffee: What It Tastes Like, Why It Happens, and How to Fix It.
  • The twin myths of “easier to extract” and “overextraction” - Scott Rao
  • The Hidden Problem With Brewing Lighter Roasts - Ratio Coffee
Vietnam Clean Coffee · Knowledge Library · caphesachvietnam.com
Back to the library →